|
|
Service device for automatic sanitary equipment
Kudláček, Martin ; Levek, Vladimír (referee) ; Šteffan, Pavel (advisor)
The aim of this thesis is to inform readers about the basic principle of electronics for which the service module for the automatic sanitary technique will be designed, as well as design and describe the most important parts of the module theoretically. Likewise, the thesis deals with the most common mistakes in the design of printed circuits boards with respect to the resistance of the resulting device against interference. The implementation itself includes both module design and a communication algorithm for connecting multiple service modules and their remote control using the Raspberry Pi minicomputer. The thesis also contains a design of algorithm for verification of data transmission by the transmission system.
|
|
|
The quality of electric energy in a low voltage public supply networks
Macoszek, Pavel ; Šlezingr, Jan (referee) ; Bok, Jaromír (advisor)
This thesis contains four main chapters, which describe qualitative parameters of supply voltage and measurement and analysis received information. The theoretical part consists of three chapters. Characteristics of low voltage are described in the first chapter. Next chapter describes disturbing events, which have influence on quality supply voltage, reasons for their occurrence spreading in network, eventually arrangement leading to the disappearance of disturbing events on other electric appliances in network. Last theoretical chapter describes measuring instruments of supply voltage. The purpose of these theoretical parts is to introduce the reader into supply voltage quality issues and can be used for preparation of measurement and evaluation of acquired data under norm ČSN EN 50160 (Voltage characteristic of electricity supplied by public distribution systems). An analysis of real network is the last part of this thesis. There is applied acquired knowledge with the aim of analysis of real states of qualitative parameters of supply voltage in network.
|
|
|
Critical Parameters for Wireless Networks WiFi and WiMAX
Grenar, Milan ; Křepelka, Václav (referee) ; Baroňák, Ivan (referee) ; Filka, Miloslav (advisor)
My thesis will be aimed at problems of wireless networks WiFi and WiMAX. A modelling of network will be put into effect onto which the measurement will be implemented and the impacts of network load on the data transfer Quality of Service (QoS) will be examined with aiming at VoIP. On this network model a power failure will be simulated and the impacts of this failure after restoring the power supply will be monitored. The aim of this thesis is to check the rate of network throughput while preserving a providing service quality and to suggest an economica1ly acceptable solution of the problems relating to feeding tension outage of the access point (AP) for a practical usage in these networks.
|
|
|
The quality of electric energy in a low voltage public supply networks
Vývoda, Marek ; Pithart, Jan (referee) ; Bok, Jaromír (advisor)
This thesis deals with description of qualitative parameters of supply voltage as well as measurement and data evaluation issues. Theoretical part of thesis describes basic characteristics of low voltage and limits based on standard specification. Next chapter deals with specification of measurement devices used for supply voltage quality measurement. The purpose of these theoretical parts is to introduce reader into supply voltage quality issues and can be used for preparation of measurement and acquired data evaluation under norm ČSN EN 50160 (Voltage characteristic of electricity supplied by public distribution systems). An analysis of real network is the last part of this thesis, in which application of acquired knowledge on assigment of real states of qualitative parameters of supply voltage in network.
|
|
|
Design of voltage references in BiCMOS ONC18 process
Dušek, Samuel ; Prokop, Roman (referee) ; Šotner, Roman (advisor)
This bachelor's thesis deals with design of voltage references in 180 nm technology of the ON Semiconductor company with main focus on the lowest value of power supply. First part presents theoretical knowledge concerning voltage references. The next part introduces chosen topologies, describes their function and methods of initial design. In this part there are also shown results which were achieved after initial design and after optimization of all references. The last part appraises the best replacement for bandgap etalon in area of power supply, where bandgap reference can not work properly.
|
|
|
Service device for automatic sanitary equipment
Kudláček, Martin ; Levek, Vladimír (referee) ; Šteffan, Pavel (advisor)
The aim of this thesis is to inform readers about the basic principle of electronics for which the service module for the automatic sanitary technique will be designed, as well as design and describe the most important parts of the module theoretically. Likewise, the thesis deals with the most common mistakes in the design of printed circuits boards with respect to the resistance of the resulting device against interference. The implementation itself includes both module design and a communication algorithm for connecting multiple service modules and their remote control using the Raspberry Pi minicomputer. The thesis also contains a design of algorithm for verification of data transmission by the transmission system.
|
|
|
Design of voltage references in BiCMOS ONC18 process
Dušek, Samuel ; Prokop, Roman (referee) ; Šotner, Roman (advisor)
This bachelor's thesis deals with design of voltage references in 180 nm technology of the ON Semiconductor company with main focus on the lowest value of power supply. First part presents theoretical knowledge concerning voltage references. The next part introduces chosen topologies, describes their function and methods of initial design. In this part there are also shown results which were achieved after initial design and after optimization of all references. The last part appraises the best replacement for bandgap etalon in area of power supply, where bandgap reference can not work properly.
|
|
|
The quality of electric energy in a low voltage public supply networks
Macoszek, Pavel ; Šlezingr, Jan (referee) ; Bok, Jaromír (advisor)
This thesis contains four main chapters, which describe qualitative parameters of supply voltage and measurement and analysis received information. The theoretical part consists of three chapters. Characteristics of low voltage are described in the first chapter. Next chapter describes disturbing events, which have influence on quality supply voltage, reasons for their occurrence spreading in network, eventually arrangement leading to the disappearance of disturbing events on other electric appliances in network. Last theoretical chapter describes measuring instruments of supply voltage. The purpose of these theoretical parts is to introduce the reader into supply voltage quality issues and can be used for preparation of measurement and evaluation of acquired data under norm ČSN EN 50160 (Voltage characteristic of electricity supplied by public distribution systems). An analysis of real network is the last part of this thesis. There is applied acquired knowledge with the aim of analysis of real states of qualitative parameters of supply voltage in network.
|
|
|
Critical Parameters for Wireless Networks WiFi and WiMAX
Grenar, Milan ; Křepelka, Václav (referee) ; Baroňák, Ivan (referee) ; Filka, Miloslav (advisor)
My thesis will be aimed at problems of wireless networks WiFi and WiMAX. A modelling of network will be put into effect onto which the measurement will be implemented and the impacts of network load on the data transfer Quality of Service (QoS) will be examined with aiming at VoIP. On this network model a power failure will be simulated and the impacts of this failure after restoring the power supply will be monitored. The aim of this thesis is to check the rate of network throughput while preserving a providing service quality and to suggest an economica1ly acceptable solution of the problems relating to feeding tension outage of the access point (AP) for a practical usage in these networks.
|
|
|
The quality of electric energy in a low voltage public supply networks
Vývoda, Marek ; Pithart, Jan (referee) ; Bok, Jaromír (advisor)
This thesis deals with description of qualitative parameters of supply voltage as well as measurement and data evaluation issues. Theoretical part of thesis describes basic characteristics of low voltage and limits based on standard specification. Next chapter deals with specification of measurement devices used for supply voltage quality measurement. The purpose of these theoretical parts is to introduce reader into supply voltage quality issues and can be used for preparation of measurement and acquired data evaluation under norm ČSN EN 50160 (Voltage characteristic of electricity supplied by public distribution systems). An analysis of real network is the last part of this thesis, in which application of acquired knowledge on assigment of real states of qualitative parameters of supply voltage in network.
|
guest ::
